Inspection system ST-6035 successfully passed Site Acceptance Test in Pogranichny Check Point
On December 12, 2013, inspection system ST-6035 successfully passed Site Acceptance Test in Pogranichny Check Point, Vladivostok region, with participation of State Customer according to the agreed SAT Program.
The technological equipment of ST-6035 is demonstrated, its operation is tested, its performances are measured at winter operation conditions (at outdoor temperature -25° C).
The measurement results are written in SAT protocols. The protocols are signed by the State Customer.
Main performances:
- X-ray energy: 6/3.5 MeV
- Dose rate: 4.0 Gy/min at 1 m
- Accelerator repetition rate: 2х200 Hz
- Scanning speed: 18 m/min
- Maximal integral dose at one hour operation at 10 cm distance from tunnel wall surface and fence near shielding doors: ≤ 0.6 µSv
- Steel penetration: 400 mm
Wire sensitivity:
- In air: 0.5 mm
- Behind 100 mm steel: 1.0 mm
- Behind 250 cm steel: 6 mm
Contrast sensitivity:
- Behind 40 mm steel: <1%
- Behind 200 mm steel: 0.5%
- Behind 300 mm steel: 1%
Precise material discrimination on test pieces from carbon, aluminium, steel, lead in mass thickness range upto 120 g/cm2.
Weight evaluation of test pieces from carbon, aluminium, steel, lead with precision about 10%.